ACOUSTIC-JACKET, Acoustic-Jacket Acoustical Noise Barrier

Mass filled vinyl film in a range of weights of 0.5 to 2.0lbs/sq ft (2.44 to 9.76kg/M) nd thickness from 0.040 to 0.160in (1.01 - 4.04mm)
Products specifications
Item Name Acoustic-Jacket Acoustical Noise Barrier
Material Mass Filled Vinyl Film
Weight 0.5 to 2.0 lbs/sq.ft
2.44 to 9.76 kg/m²
Thickness 0.040 to 0.160 in
1.01 - 4.04 mm
Features
  • Sound Transmission Classification (STC) 20 - 32
  • High octave band insertion loss values
  • Composite metal/barrier laminates permit faster more effective application
  • Complete, interchangeable lead or mass filled vinyl noise barrier design capability
  • Recognizable “safety green”, no lead mass filled vinyl laminate
  • Range of weights, 0.5 to 2.0lbs/sq ft (2.44 to 9.76kg/M2) for designs
  • 0.020in (0.05mm) stucco embossed aluminum, standard laminated facia on roll goods
  • Protective 1.0in (0.025mm) mil polyfilm cover over laminated lead
  • Complete or partial removal/replacement capabilities.
Uses Noise Control System, Acoustic-Jacket, composite, noise barrier jacketing products are used in combination with selected thicknesses and typed of energy absorbing insulation(s) to reduce harmful and annoying noise levels generated in chemical, petrochemical, pulp and paper and power plants and at compressor stations as well as in light commercial manufacturing facilities.

Noise, radiating from processing equipment, such as turbines, compressors, fans, pumps, valves and related piping and ducting and other work place noise sources, if effectively reduced, when insulated and acoustically jacketed or enclosed. Indoor/outdoor, fixed in-place and/or removable/replaceable covers, barriers and enclosures may be installed for essentially all types of environments and exposures using Noise Control Systems Acoustic-Jacket acoustical jacketing.
Installation Following the installation of the specified type(s) and thickness(es) of insulation to equipment and related piping and ducting surfaces:

Install each section of the specified type(s) and weight(s)/sq ft (M2) Acoustic-Jacket or Acoustic-Jacket L noise barrier jacketing or sheeting providing a 2in (50.8mm) overlap of the previously applied sections. Including a 2in (50.8 mm) longitudinal hemmed edge seam on pipe jacketing.

For piping, caulk all circumferential and longitudinal overlapped jacketing joints with a 1/8 - 1/4in (3.175 - 6.35mm) diameter bead of Acoustic Seal Joint Sealant, Approximately 1 to 2in (25.4 to 50.8 mm) under each overlapping edge.

Band the acoustical jacketing securely, using 3/4 x 0.020in (19.05 x .508mm) stainless steel strapping over each of the circumferential overlapped caulked joints, and on approximately 9in (228.6mm) centers on each section of jacketing.

Install acoustical jacketing and sheeting over dry acoustic mastic coated surfaces, providing a 3in (76.2mm) overlap. Apply a 1/8 - 1/4in (4-7mm) diameter bead of Acoustic-Seal Joint Sealant in all joints prior to securing with 3.4 x 0.200 in (19.05 x .508mm) stainless steel banding.

Flash metal to metal and/or mastic joints with Acoustic-Seal Joint Sealant, 2in (50.8mm) onto both materials. Avoid the use of screws and rivets. They tend to loosen and fall out.

For Vertical Piping:

Fabricate “s” clips form 3/4 x 0.020in (19.05 x .508mm) stainless steel strapping, 3in (75.2mm) in length, with 1in (25.4mm) legs insert the down leg(s), in quadrant positions, to accept and support each following tier of overlapping jacketing.

Apply 1/8 - 1/4in (3mm-6mm) diameter bead of joint sealant circumferentially over the “s” clips down approximately 2in (50.8mm) from the upper circumferential edge of jacketing to be overlapping and in the longitudinal lap of jacketing being installed.

Insert the lower edge of the following jacketing section into the “s” clips for support and band using 3/4 x 0.20in (19.05 x .508mm) stainless steel strapping over the overlapped caulker joint and on 9in (228.6mm) centers on each jacket section being installed.
Sound Transmission Losses
Frequency (Hz) Sound Pressure Level (dB)
125 15
250 19
500 21
1000 28
2000 33
4000 37
Corrosion Resistance Excellent for most oils, grease, acids, and mild alkalis.
STC Rating STC Rating up to 32
Service Temperature -40º F to 220º F
Flammability Per Fed. Test Std. No. 191-5903 Flame Out: 0 Seconds
Afterglow: 0 Seconds
Char Length: 0.2”
Seam Closure Materials Stainless Steel Hog Rings
Stainless Steel Staples

Stainless Steel Thread

Teflon Coated Fiberglass Thread
Closure Accessories Belting - Fiberglass, Teflon, and Silicone
Coated Fiberglass

Draw Cords

Hook And Loop Fasteners - Flame Retardant

Stainless Steel Belt Rings

Stainless Steel Lacing Anchors
Spring Dia. 0.062 Inch
I.D. 0.100 Inch
Stiffness Heavy
Min. Bend Dia. 2.75 Inch
Size (O.D.) 0.250 Inch
6.4 mm
Weight Supported Horizontally at Distance 6" 7.5 oz
Weight Supported Horizontally at Distance 12" 3.2 oz
Weight Supported Horizontally at Distance 18" 1.2 oz
Ferrule Thread 5/16-24 Male
1/4-20 Male
1/4-20 Female
5/16-32 Male
Finishes Baked epoxy paint
Brass plated
Chrome plated
Copper plated
Galvanized
Micrometer
Nickel plated
Satin chrome plated
Unfinished
Vinyl-clad (colors) (white, black,red)
Additional Information When we know the weight of the object to be supported (head weight) and your product application, we design flexible tubing with both rigidity and obedience to fit your requirements.

Our engineering department will work with you to create gooseneck tubing to meet your specific requirements and/or create an improvement over the product you are currently using.

Uniprise will attach ferrules supplied by the customer, or make them to your prints and attach them. We can also design fittings for special applications.

Industries we serve:
  • Lighting and Lamps
  • Audio
  • Machine Tool
  • Medical/Surgical Fiber Optic
  • Refridgeration
  • Optical
  • Telephone
  • Hand Tools
  • Automotive
  • Photographic
  • POP Display
For your special requirements:

From special small purpose flexible hose to head mounted microphone applications, our engineering department will work with you in creating flexible metal hose to meet your specific requirements and/or create an improvement over the product you are currently using.
Industries we serve
  • Lighting and Lamps
  • Audio
  • Machine Tool
  • Medical/Surgical Fiber Optic
  • Refridgeration
  • Optical
  • Telephone
  • Hand Tools
  • Automotive
  • Photographic
  • POP Display
For your special requirements

From special small purpose flexible hose to head mounted microphone applications, our engineering department will work with you in creating flexible metal hose to meet your specific requirements and/or create an improvement over the product you are currently using.

Home About NCS Architectural Industrial Downloads Contact Us RFQ
 

Noise Control Systems  707 W. 26th Ave. Covington, LA 70433  •  985.892.7973  •  985.892.7196 (FAX)

 
Noise Control Systems